UPDATE : We are experiencing a higher volume of orders, please check updates page for current lead times.

Installation Kit for 39 inch Triple Basalt Fountain

Production Lead Time:




12h x 72w x 72d inches

1100 lbs


Made for outdoor residential installations of the 39"H Triple Basalt Fountain design only (not sufficient for the 60" and 72" sizes). Holds approx. 220 gallons of water. Made to run year-round.

Kit includes: pond liner, wood frame, galvanized grating (no cuts made so you can position sections then cut on-site), and 3 concrete pedestals.

11 bags of Pebbles recommended to cover this kit. Qty 3 pumps recommended, one for each section.

Please flip through the photos to see this kit going into the ground, step-by-step. Our snapshots show the 4x4' size kit, but the same process applies to this kit size. 

The different steps with this kit:

1. The pond liner should be placed underneath the concrete pedestals (instead of on top, as seen in the photos). Please use extra pond liner under each pedestal to create plenty of padding to prevent tearing/leaking from the sharp corners.

2. You will need to make cuts in the galvanized grating on site for waterline and pump access after you determine how you would like to position the 3 sections of the Triple Basalt Fountain. The 2 pieces of galvanized grating for the will overlap in the center, as shown in the last 2 photos. We take (2) sheets of 4x8' grating and cut them down to (2) 4x6' sheets. We then overlap them by 2' in the center to create the 6x6' grate. You will also level and install 3 concrete pedestals (instead of 1), positioned as you wish (straight row, diagonal, etc). After you make the cuts for the pump access (one corner) and hose access underneath the fountain, we recommend using one of the extra pieces of grating from the hose area cutout to cover the pump access area. 

3. If pinning is required, please let us know before you place your order so that we can drill additional holes. If you wish to use this kit, you will need to drill the concrete pedestals on-site to accommodate the stainless pins. Designing a custom reservoir so pins can be set while pouring on-site is ideal (see our Suggested Commercial Installation Diagram as an example for your design). You may also use this as a guide for installing our 60"H and 72"H Triple Basalt Fountains and consult your local codes. You will probably want to design & pour a longer concrete pedestal in the center of the reservoir to accommodate the 3 separate sections of the Triple Basalt Fountain.


View Specifications

Installation Information


Helpful hints for installation:
1. Place some kind of padding between the concrete pedestals and pond liner to prevent tearing/leaking. You could use excess pond liner to create a nice barrier; this should help prevent future issues.

2. After connecting your flexible hosing from your pump up through the center of the Stone Forest fountain, cut a small strip from the edge of your extra pond liner. Take the strip and wrap/wind it tightly around the top of the hose. You can secure it with electrical tape if necessary. This creates a plug that allows you to push it snugly into the top of the 1 1/4" hole. This will prevent the hose from slipping down into the stone, and from moving around.

Shipping Quotes:

Our online quoting system will return an accurate quote for verifiable addresses, and orders of 15 items or less.  For unusual addresses or larger orders, please contact us for an exact shipping rate based on the items you are ordering and your delivery zip code.  Call us at 888-682-2987 or email info@stoneforest.com.

Because we want to offer the lowest possible prices on shipping, we don't use flat rates or offer an amount based on the order price. Our rates are figured on total weight and delivery address.

As the largest independent shipper in New Mexico, we've negotiated reasonable rates.
With over 20 years of shipping experience, we take full responsibility for products in transit and assure an easy and affordable delivery.

We can ship to any location in the world—we get fantastic rates from the major freight companies, and include residential delivery and 24 hour delivery notification at no extra charge above standard shipping cost.



UPS orders ship via Ground.  Please inspect items upon arrival and notify us immediately with shortages or damage. 

FREIGHT We work with two of our most trusted freight carriers, ABF and SAIA to deliver our heavier items. Upon shipment these carriers will call you to schedule a delivery appointment. You will need an adult on site to accept the shipment. Make sure to supply an accurate phone number. The freight company will make three attempts to contact you for delivery before they begin to charge storage fees.

Our carriers will drop your order at your curb but will not bring it any closer. Lift gate service is not available for individual items over 2000 pounds. You will need a way on site to offload the truck. We do our best to pack orders to allow for lift gate service. 

Orders will arrive on standard freight trucks. Deliveries in some locations are not possible. Extremely narrow roads, areas with low over hanging trees and powerlines, and dirt roads can cause delivery issues. If you are concerned about your location, reach out to us and we can confirm deliverability. We can also ship directly to the freight terminals for pick up by your contractor or landscaper. 

Any change of address after the shipment has left our shop will incur a reconsignment fee.

If the crate is damaged, ask the driver to wait while you inspect for damage to your items or refuse the delivery.  Any product damages must be claimed within five days.