COVID-19 UPDATE : We are experiencing a higher volume of orders. Expect longer shipping times. Our garden gallery is open to the public by appointment. See updates page for more information.

Fountain Installation Kit 4'x4'


#DKIT 4x4


12h x 48w x 48d inches

350 lbs


For outdoor residential installations. Holds approx. 100 gallons of water. Made to run year-round.

Kit includes: pond liner, wood frame, galvanized grating cut for waterline and easy pump access, concrete pedestal.

6 bags of Pebbles recommended to cover this kit. Please check the list of Recommended Accessories under the Fountain/Basin of your choice to make sure this kit is large enough for your installation.

Please flip through the photos to see this kit going into the ground, step-by-step. 

If pinning is required for your installation and you wish to use this kit, the pond liner will need to run underneath the concrete pedestal. Designing a custom reservoir so pins can be set while pouring is ideal (see our Suggested Commercial Installation Diagram as an example for your design).


View Specifications


Helpful hints for installation:
1. Place some kind of padding between the concrete pedestal and pond liner to prevent tearing/leaking. You could use excess pond liner, felt, or even newspaper to create a nice barrier. The weight of the water will want to pull the pond liner down on those corners, so this should help prevent future issues.

2. After connecting your flexible hosing from your pump up through the center of the Stone Forest fountain, cut a small strip from the edge of your extra pond liner. Take the strip and wrap/wind it tightly around the top of the hose. You can secure it with electrical tape if necessary. This creates a plug that allows you to push it snugly into the top of the 1 1/4" hole. This will prevent the hose from slipping down into the stone, and from moving around.